This session: 21 - 25 Dec 2026
This Process Automation and DCS Configuration session in Düsseldorf (Germany) runs from Monday 21 December to Friday 25 December 2026 (week 52, Q4 2026). It is the only date in Düsseldorf (Germany) in 2026, at a fee of £5,900, the same for each of them. Registration is open for this date. It is held in person.
| Dates | Monday 21 Dec – Friday 25 Dec 2026 |
|---|---|
| Week | 52 of 2026 |
| Duration | One week |
| Fee | £5,900 |
| Status | Open for registration |
| Format | In person |
Introduction
In the age of industrial digitization and operational excellence, mastering Process Automation and Distributed Control System (DCS) Configuration is essential for improving plant efficiency, safety, and scalability.
This hands-on training program equips engineers, technicians, and operations managers with the critical knowledge and practical experience needed to design, implement, and optimize modern control systems.
Participants will gain a deep understanding of system architecture, control strategies, field device integration, and advanced engineering tools. The course also emphasizes practical skills in Control Loop tuning, HMI Design, and SCADA integration, preparing attendees to take on real-world automation challenges across various industrial sectors.
Course Objectives
By the end of this program, participants will be able to:
- Understand the fundamentals of Process Automation and control system architectures.
- Identify and describe the components and structure of a modern Distributed Control System (DCS).
- Configure core and advanced DCS functions using engineering software.
- Integrate field instrumentation and I/O modules within a DCS platform.
- Tune PID Control Loops for optimal system responsiveness.
- Design interactive Human-Machine Interfaces (HMI) for operational visibility.
- Perform troubleshooting and apply maintenance best practices.
- Connect DCS platforms with SCADA systems and Manufacturing Execution Systems (MES).
- Enhance overall system performance and reliability through System Optimization.
Course Outlines
Day 1: Fundamentals of Process Automation
- Introduction to Industrial Automation and its impact on modern industry.
- Overview of control system types: PLCs, SCADA, and DCS.
- Architecture and key components of a DCS.
- Open-loop vs. Closed-loop control strategies.
- Introduction to Proportional-Integral-Derivative (PID) control and tuning concepts.
Day 2: DCS Architecture and Hardware Overview
- Core hardware components: controllers, HMIs, I/O modules.
- Redundancy, failover mechanisms, and industrial network topologies.
- Comparing DCS and PLC systems: use cases and decision-making.
- Communication protocols: Modbus, Profibus, OPC, and others.
- Hardware installation practices and industrial cabling standards.
Day 3: DCS Configuration and Engineering Tools
- Navigating and using DCS configuration software.
- Creating and managing control strategies and loops.
- Setting up alarms, notifications, and event triggers.
- Designing graphical operator displays (HMI Design) for real-time monitoring.
- Tagging conventions and organizing control data structures.
Day 4: Advanced Configuration and System Integration
- Programming sequential and batch control applications.
- Interfacing with smart field devices (e.g., HART, FOUNDATION Fieldbus).
- Overview of Safety Instrumented Systems (SIS).
- Configuring historical data logging and trending capabilities.
- Integrating with SCADA systems and MES platforms.
Day 5: Maintenance, Troubleshooting & Case Studies
- Preventive and corrective maintenance planning.
- Diagnosing common DCS issues and fault isolation.
- System backup, recovery procedures, and configuration audits.
- Practical exercises and real-life case study reviews.
- Final review session, Q&A, and participant assessment.
Why Attend this Course: Wins & Losses!
- Gain in-depth knowledge of Process Automation principles and DCS operation.
- Apply hands-on configuration skills for system architecture and control logic.
- Improve plant efficiency through better Control Loop tuning and optimization.
- Learn to design intuitive and functional HMI interfaces for operators.
- Understand how to integrate field-level devices with control platforms.
- Leverage advanced diagnostics to reduce downtime.
- Improve your qualifications with relevant, in-demand technical expertise.
- Collaborate and exchange insights with professionals from multiple industries.
Conclusion
This comprehensive training on Process Automation and DCS Configuration is designed to elevate the skills of professionals who aim to modernize and optimize their industrial environments.
From configuring Control Loops and designing HMI systems, to integrating with SCADA platforms and troubleshooting complex systems, this program offers both strategic insight and technical depth.
Investing in such training will not only enhance your individual capabilities but will also contribute to your organization’s drive toward efficiency, safety, and digital transformation.
Whether you're a rising engineer, seasoned technician, or operational decision-maker, this course will provide practical tools to meet today’s and tomorrow’s industrial challenges.
Good to know
How long is the course, and what are the daily hours?
This date lasts one week: 21 - 25 Dec 2026. A one-week course is 20 hours over 5 days: 4 hours each training day (9am – 1pm). Timing and duration can be customised to your needs.
From the FAQ: What is my daily training agenda?
Which language is the course taught in?
Courses are offered in English and Arabic. The course language is officially English; on request, it can be delivered in Arabic while keeping the English terms.
From the FAQ: In which language do you offer your training courses?
Will I receive a certificate?
Yes. At the end of the course you receive the course certificate issued by BlackBird Training, with an online QR code to verify it.
From the FAQ: Do I receive the certificate at the end of the course?
How do I book, and when do I pay?
Choose Apply now and fill in the form; we guide you through the rest. The acceptance letter is sent within 24 hours of your registration. Payment is due at least 10 days before the course starts, online by credit card or by bank transfer.
From the FAQ: How can I register for a training course in BlackBird?, When do I get my Acceptance Letter?, When do I need to pay?, How can I pay for the course?
Can I cancel or send a colleague instead?
You can send a replacement delegate if you tell us one week before the course starts. Cancellation and refund terms are set out in the cancellation policy.
From the FAQ: Can I send a replacement delegate?
Enquire about this date
Process Automation and DCS Configuration, Düsseldorf (Germany), 21 - 25 Dec 2026