Skip to content

Course date

Training Course: Microwave Backhaul Link Design & Network Performance Engineering – Lyon (France), 23–27 Aug 2027

Design Reliable Microwave Links and Optimize Performance

Dates
City
Lyon (France)
Fee
£5,900
Course code
GC3255614

This session: 23 - 27 Aug 2027

This Microwave Backhaul Link Design & Network Performance Engineering session in Lyon (France) runs from Monday 23 August to Friday 27 August 2027 (week 34, Q3 2027). It is the 1st of 2 dates in Lyon (France) in 2027, at a fee of ⁦£5,900⁩, the same for each of them. Registration is open for this date. It is held in person.

DatesMonday 23 Aug – Friday 27 Aug 2027
Week34 of 2027
DurationOne week
Fee£5,900
StatusOpen for registration
FormatIn person

Other dates for this course

Introduction

Microwave backhaul is a critical component of modern mobile networks, delivering high-capacity and low-latency transport for LTE and 5G NR deployments. As operators move toward network densification and higher spectrum utilization, precise microwave link engineering becomes essential to maintain reliability, availability, and performance.

This intensive one-week program provides comprehensive coverage of microwave point-to-point (P2P) link design, complete link budget methodologies, rain fade analysis, frequency planning, and advanced network performance engineering. The course also integrates 5G NR coverage planning principles, 3D beamforming concepts, Massive MIMO techniques, and capacity dimensioning strategies to ensure full alignment between the radio access network and the backhaul transport layer. Participants will gain practical engineering knowledge to design resilient, high-performance microwave networks in dense and high-demand environments.

Course Objectives

By the end of this program, participants will be able to.

  • Design microwave P2P links using complete link budget calculations, including EIRP, receiver sensitivity, and fade margin.
  • Analyze propagation mechanisms such as free space path loss, rain attenuation, and multipath fading.
  • Evaluate link availability objectives from 99.99% to 99.999% using ITU-R models, including ITU-R P.530 and ITU-R P.838.
  • Apply Fresnel zone clearance and path profiling principles.
  • Perform frequency planning and mitigate co-channel, adjacent-channel, and cross-polarization interference.
  • Plan 5G NR coverage across Sub-6 GHz and mmWave environments.
  • Implement 3D beamforming and massive MIMO concepts to enhance spectral efficiency.
  • Execute capacity planning and backhaul dimensioning for dense 5G NR networks.
  • Interpret and optimize latency, jitter, QoS parameters, and end-to-end network performance KPIs.

Course Outlines

Day 1: Microwave Fundamentals and Propagation Engineering

  • Microwave spectrum bands and regulatory considerations.
  • Point-to-point microwave system architecture.
  • Free space path loss and propagation mechanisms.
  • Fresnel zone clearance and path profiling principles.
  • Overview of ITU-R propagation recommendations.

Day 2: P2P Link Budget and Rain Fade Analysis

  • Complete link budget structure including EIRP, receiver sensitivity, and fade margin.
  • Adaptive modulation and throughput trade-offs.
  • Rain attenuation modeling using ITU-R P.530 and ITU-R P.838.
  • Availability objectives from 99.99% to 99.999%.
  • Fade margin dimensioning and reliability planning.

Day 3: Frequency Planning and Interference Management

  • Frequency band selection criteria.
  • Co-channel and adjacent-channel interference mechanisms.
  • Cross-polarization interference mitigation strategies.
  • Frequency reuse and coordination planning.
  • Multi-hop backhaul network design.

Day 4: 5G NR Coverage Planning and 3D Beamforming

  • 5G NR architecture and transport requirements.
  • Propagation environments for sub-6 GHz and mmWave.
  • Coverage planning methodology.
  • 3D beamforming principles.
  • Massive MIMO and spectral efficiency enhancement.

Day 5: Capacity Dimensioning and Network Performance Engineering

  • Traffic modeling and throughput estimation.
  • Capacity planning for dense urban deployments.
  • Backhaul dimensioning for 5G NR networks.
  • Latency, jitter, and QoS considerations.
  • End-to-end performance KPIs and optimization strategies.

Why Attend This Course? Wins & Losses!

  • Master advanced microwave backhaul link design techniques.
  • Improve link availability and reliability through precise rain fade analysis and fade margin planning.
  • Enhance 5G NR network performance through accurate coverage planning and capacity dimensioning.
  • Reduce interference through structured frequency planning and coordination strategies.
  • Optimize network performance KPIs, including latency, jitter, and throughput.
  • Strengthen alignment between backhaul engineering and 5G NR deployment objectives.

Conclusion

In today’s high-capacity 5G NR era, microwave backhaul link design and network performance engineering are no longer optional technical skills but strategic capabilities that define network success. This program equips you with the expertise to engineer highly available, interference-resilient, and performance-optimized microwave networks aligned with modern 5G architecture requirements.

By mastering link budget design, rain fade analysis, frequency planning, 3D beamforming, Massive MIMO, and capacity dimensioning, you position yourself at the forefront of next-generation telecom engineering. This is your opportunity to transform complex microwave and 5G challenges into measurable network excellence and competitive advantage.

Other dates for this course

  1. Fee £5,900

    Apply now Enquire PDF
  2. Fee £5,900

    Apply now Enquire PDF
  3. Fee £5,900

    Apply now Enquire PDF
  4. Fee £4,900

    Apply now Enquire PDF
  5. Fee £4,900

    Apply now Enquire PDF
  6. Fee £5,900

    Apply now Enquire PDF

All dates and locations

Good to know

How long is the course, and what are the daily hours?

This date lasts one week: 23 - 27 Aug 2027. A one-week course is 20 hours over 5 days: 4 hours each training day (9am – 1pm). Timing and duration can be customised to your needs.

From the FAQ: What is my daily training agenda?

Which language is the course taught in?

Courses are offered in English and Arabic. The course language is officially English; on request, it can be delivered in Arabic while keeping the English terms.

From the FAQ: In which language do you offer your training courses?

Will I receive a certificate?

Yes. At the end of the course you receive the course certificate issued by BlackBird Training, with an online QR code to verify it.

From the FAQ: Do I receive the certificate at the end of the course?

How do I book, and when do I pay?

Choose Apply now and fill in the form; we guide you through the rest. The acceptance letter is sent within 24 hours of your registration. Payment is due at least 10 days before the course starts, online by credit card or by bank transfer.

From the FAQ: How can I register for a training course in BlackBird?, When do I get my Acceptance Letter?, When do I need to pay?, How can I pay for the course?

Can I cancel or send a colleague instead?

You can send a replacement delegate if you tell us one week before the course starts. Cancellation and refund terms are set out in the cancellation policy.

From the FAQ: Can I send a replacement delegate?

All frequently asked questions Contact us

Enquire about this date

Microwave Backhaul Link Design & Network Performance Engineering, Lyon (France), 23 - 27 Aug 2027

Required