This session: 7 - 11 Nov 2027
This Gas Turbine Operation and Troubleshooting session in Amman (Jordan) runs from Sunday 7 November to Thursday 11 November 2027 (week 44, Q4 2027). It is the 2nd of 2 dates in Amman (Jordan) in 2027, at a fee of £4,900, the same for each of them. Registration is open for this date. It is held in person.
| Dates | Sunday 7 Nov – Thursday 11 Nov 2027 |
|---|---|
| Week | 44 of 2027 |
| Duration | One week |
| Fee | £4,900 |
| Status | Open for registration |
| Format | In person |
This course provides Senior Field Operators – Utilities & Offsite with practical knowledge of gas turbine operation, startup, shutdown, monitoring, troubleshooting, alarms, trips, and abnormal conditions. The program emphasizes field application, practical problem-solving, and operator decision-making rather than advanced theory.
Course Objectives
By the end of this course, participants will be able to:
- Understand gas turbine components, systems, and operating principles.
- Perform safe startup, normal operation, and shutdown procedures.
- Monitor critical operating parameters and identify abnormal conditions.
- Understand alarms, trips, interlocks, and protective systems.
- Troubleshoot common turbine, combustion, fuel, lubrication, and compressor problems.
- Improve field inspection, decision-making, and control-room coordination.
- Apply practices that improve equipment reliability, safety, and performance.
Course Outlines
Day 1: Gas Turbine Fundamentals
- Gas turbine operating principles and applications
- Major components and auxiliary systems
- Compressor, combustion, turbine, and exhaust systems
- Fuel, lubrication, cooling, and starting systems
- Critical operating parameters
- Practical equipment walkdown
Day 2: Startup, Operation & Shutdown
- Pre-startup checks and permissives
- Startup and acceleration sequence
- Loading and normal operation
- Monitoring temperature, pressure, speed, and vibration
- Normal and emergency shutdown
- Startup/shutdown practical scenarios
Day 3: Monitoring, Alarms & Abnormal Conditions
- Operating trends and field indications
- Alarms, trips, interlocks, and protection systems
- High temperature and temperature spread
- High vibration and bearing problems
- Flame failure and fuel gas problems
- Compressor surge and fouling
- Practical alarm and trip case studies
Day 4: Troubleshooting & Fault Diagnosis
- Systematic troubleshooting methodology
- High temperature and vibration
- Low power and compressor performance
- Fuel and combustion problems
- Lubrication and starting system problems
- Field checks and operator response
- Practical troubleshooting exercises
Day 5: Emergency Scenarios & Practical Assessment
- Gas turbine trips and emergency response
- Overspeed, vibration, flame failure, and fuel loss
- Lube oil and instrument air failures
- Restart after a trip
- Integrated operating scenario
- Practical assessment, review, and Q&A
Why Attend This Course: Wins & Losses!
- Improve Troubleshooting Skills: Identify and resolve common gas turbine problems faster.
- Increase Operator Confidence: Strengthen field operating and decision-making skills.
- Improve Safety: Respond effectively to alarms, trips, and emergency conditions.
- Enhance Reliability: Reduce equipment damage, downtime, and unnecessary trips.
- Practical Learning: Apply knowledge through realistic scenarios and troubleshooting exercises.
Conclusion
This one-week course equips Senior Field Operators with the practical skills required to operate, monitor, and troubleshoot gas turbines safely and effectively. The strong focus on field application, abnormal conditions, and practical scenarios helps improve operator confidence, equipment reliability, and overall Utilities & Offsite performance.
Frequently Asked Questions (FAQ)
Who should attend?
Senior Field Operators, Utilities & Offsite Operators, and Operations Supervisors.
Is the course practical?
Yes. The course emphasizes practical operation, troubleshooting, scenarios, and case studies.
Does it cover startup and shutdown?
Yes, including normal and emergency procedures.
Does it cover alarms and trips?
Yes, including interlocks, protective systems, and operator response.
Can it be customized?
Yes. The course can be adapted to the specific gas turbine manufacturer, model, control system, and site requirements.
Good to know
How long is the course, and what are the daily hours?
This date lasts one week: 7 - 11 Nov 2027. A one-week course is 20 hours over 5 days: 4 hours each training day (9am – 1pm). Timing and duration can be customised to your needs.
From the FAQ: What is my daily training agenda?
Which language is the course taught in?
Courses are offered in English and Arabic. The course language is officially English; on request, it can be delivered in Arabic while keeping the English terms.
From the FAQ: In which language do you offer your training courses?
Will I receive a certificate?
Yes. At the end of the course you receive the course certificate issued by BlackBird Training, with an online QR code to verify it.
From the FAQ: Do I receive the certificate at the end of the course?
How do I book, and when do I pay?
Choose Apply now and fill in the form; we guide you through the rest. The acceptance letter is sent within 24 hours of your registration. Payment is due at least 10 days before the course starts, online by credit card or by bank transfer.
From the FAQ: How can I register for a training course in BlackBird?, When do I get my Acceptance Letter?, When do I need to pay?, How can I pay for the course?
Can I cancel or send a colleague instead?
You can send a replacement delegate if you tell us one week before the course starts. Cancellation and refund terms are set out in the cancellation policy.
From the FAQ: Can I send a replacement delegate?
Enquire about this date
Gas Turbine Operation and Troubleshooting, Amman (Jordan), 7 - 11 Nov 2027