This session: 19 - 30 Jul 2027
This API 570 – Process Piping Inspection Program session in Paris (France) runs from Monday 19 July to Friday 30 July 2027 (week 29, Q3 2027). It is the 2nd of 3 dates in Paris (France) in 2027, at a fee of £10,600, the same for each of them. Registration is open for this date. It is held in person.
| Dates | Monday 19 Jul – Friday 30 Jul 2027 |
|---|---|
| Week | 29 of 2027 |
| Duration | Two weeks |
| Fee | £10,600 |
| Status | Open for registration |
| Format | In person |
Previous date: 25 Jan - 5 Feb 2027 Next date: 20 Sep - 1 Oct 2027 Other dates for this course
Introduction
The API 570 – Process Piping Inspection Program is a professional training course designed to develop technical competence in the inspection, evaluation, and integrity management of process piping systems.
The program focuses on providing participants with a structured understanding of piping systems operating under pressure and temperature conditions, and the inspection practices required to ensure their safe and reliable performance.
This course is intended for engineers, inspectors, maintenance specialists, and technical supervisors who are responsible for piping systems throughout their operational lifecycle.
By combining inspection theory with practical evaluation techniques, the program enables participants to identify deterioration mechanisms, assess piping condition, and support informed maintenance decisions.
The training emphasizes accuracy, consistency, and professional judgment in piping inspection activities.
Course Objectives
The API 570—Process Piping Inspection Program aims to strengthen inspection capabilities and technical decision-making.
By the end of the course, participants will be able to:
- Understand the fundamentals of process piping systems.
- Apply inspection requirements and acceptance criteria correctly.
- Identify common damage and degradation mechanisms in piping.
- Perform visual and technical inspections systematically.
- Calculate corrosion rates and estimate remaining service life.
- Evaluate piping fitness for continued operation.
- Prepare clear and accurate inspection reports.
- Support maintenance, repair, and replacement decisions.
Course Outlines
Day One: Process Piping Fundamentals
- Definition and classification of process piping systems.
- Main components and piping configurations.
- Operating conditions and design limitations.
- Inspector roles and responsibilities.
- General inspection requirements.
- Discussion of basic inspection scenarios.
Day Two: Design and Materials
- Principles of process piping design.
- Common materials used in piping systems.
- Material properties and service limitations.
- Welding types and joint considerations.
- Review of piping drawings and specifications.
- Practical examples of material selection.
Day Three: Damage Mechanisms
- Internal and external corrosion mechanisms.
- Erosion and erosion-corrosion effects.
- Stress-related cracking mechanisms.
- Thermal and mechanical damage.
- Early indicators of piping failure.
- Analysis of real inspection cases.
Day Four: Visual Inspection
- Scope and objectives of visual inspection.
- Inspection access methods and tools.
- Identification of visible defects.
- Surface condition assessment.
- Documentation of visual findings.
- Practical inspection exercises.
Day Five: Non-Destructive Examination
- Principles of non-destructive examination.
- Common examination methods for piping.
- Selection of suitable examination techniques.
- Interpretation of examination results.
- Limitations and accuracy of methods.
- Practical application examples.
Day Six: Thickness Measurement and Corrosion Calculations
- Thickness measurement techniques.
- Determination of minimum required thickness.
- Corrosion rate calculation methods.
- Remaining life estimation.
- Data validation and trend analysis.
- Calculation exercises and examples.
Day Seven: Fitness-for-Service Evaluation
- Acceptance criteria for process piping.
- Fitness-for-service concepts.
- Risk-based assessment principles.
- Repair versus replacement decisions.
- Documentation of technical evaluations.
- Scenario-based discussions.
Day Eight: Repairs and Alterations
- Types of approved piping repairs.
- Planning and execution of repairs.
- Quality control during repair activities.
- Inspection requirements after repairs.
- Conditions for return to service.
- Review of repair case studies.
Day Nine: Reporting and Documentation
- Structure of piping inspection reports.
- Clear and concise technical writing.
- Documentation of inspection data.
- Record retention and traceability.
- Compliance documentation requirements.
- Review of sample inspection reports.
Day Ten: Review and Final Evaluation
- Comprehensive review of course content.
- Technical clarification and discussion.
- Integrated piping inspection case studies.
- Final knowledge assessment.
- Practical evaluation exercises.
- Summary of key learning outcomes.
Why Attend This Course: Wins & Losses!
- Enhances technical knowledge of process piping systems.
- Improves inspection accuracy and consistency.
- Supports informed maintenance planning.
- Reduces risk of piping failures.
- Strengthens inspection reporting skills.
- Improves understanding of inspection standards.
- Builds professional confidence in inspection roles.
- Supports career progression in inspection and integrity roles.
Conclusion
The API 570 – Process Piping Inspection Program provides a comprehensive framework for developing professional piping inspection expertise. It integrates theoretical knowledge with practical inspection techniques to support safe and reliable piping operation. Participants gain the skills required to identify damage mechanisms, evaluate piping condition, and make sound technical decisions.
The program also emphasizes disciplined documentation and reporting practices. As a result, professionals completing this course are better equipped to manage process piping integrity throughout its service life.
Good to know
How long is the course, and what are the daily hours?
This date lasts two weeks: 19 - 30 Jul 2027. A two-week course is 40 hours over 10 days: 4 hours each training day (9am – 1pm). Timing and duration can be customised to your needs.
From the FAQ: What is my daily training agenda?
Which language is the course taught in?
Courses are offered in English and Arabic. The course language is officially English; on request, it can be delivered in Arabic while keeping the English terms.
From the FAQ: In which language do you offer your training courses?
Will I receive a certificate?
Yes. At the end of the course you receive the course certificate issued by BlackBird Training, with an online QR code to verify it.
From the FAQ: Do I receive the certificate at the end of the course?
How do I book, and when do I pay?
Choose Apply now and fill in the form; we guide you through the rest. The acceptance letter is sent within 24 hours of your registration. Payment is due at least 10 days before the course starts, online by credit card or by bank transfer.
From the FAQ: How can I register for a training course in BlackBird?, When do I get my Acceptance Letter?, When do I need to pay?, How can I pay for the course?
Can I cancel or send a colleague instead?
You can send a replacement delegate if you tell us one week before the course starts. Cancellation and refund terms are set out in the cancellation policy.
From the FAQ: Can I send a replacement delegate?
Enquire about this date
API 570 – Process Piping Inspection Program, Paris (France), 19 - 30 Jul 2027